The following documents are available for this model:

» O+M Manual

» Open Tank Drawing

» Mechanical Seal Drawing

» LPSB Drawing

» Lip Seal Drawing

» HPSB Drawing

» Double Mechanical Seal Drawing

The Cleveland Mixer MTD series features a high efficiency — up to 98% — parallel shaft gear reducer. While most mixing can easily overload ordinary, commercial gear reducers, the MTD’s ultra rigid, single piece, high density, cast iron housing creates the foundation of bearing strength for long life of trouble free service. Oversized gussets at each bearing location and oversized bearings
enable the MTD to bear the high bending and torque loads that are typical with most mixing applications.

All selections are rated for AGMA III conditions — continuous operation under extreme shock loading.

The product range is from 1 HP to 75 HP with output shaft diameters from 1.25 to 4.50 inches.

The product line has nine different sizes which offer B10 bearing lives in excess of 100,000 hours as a minimum.

The MTD series also offers a unique bearing and shaft support pedestal that allows the impeller shaft to remain in place while the gear reducer is removed from service for overhaul. The MTD top entry mixer is designed per your application demands. High efficiency hydrofoil impellers, radial and axial flow impellers are offered. Additionally, we can offer gas dispersion, up flow, counter
flow and high shear blades depending on the needs of your application.

Like our other top entry agitators, we back our products with a 3 year mechanical warranty and a process guarantee